BY TARAFINDAN
HACKLENDINIZ !

NE MUTLU TÜRKÜM DİYENE!

BİR TÜRK DÜNYA'YA BEDELDİR..

TOPRAĞIMIZDA GÖZÜ OLANIN
YURDUNA MEZAR KAZACAĞIZ...

"ZULMÜN OLDUĞU HERYERDEYİZ!"

  • TÜRK SİBER ORDU -
  • FATİH
  • BİZ TÜRKÜZ,BİZ UNUTMAYIZ,BİZ AFFETMEYİZ,BİZ ORDUYUZ
    • -
    <
    • Material testing machines Z2000E and Z2500E

      0 out of 5

      Description

      • Display-equipped remote control for testControl II
      • Measured-value transmission-rate increase from standard 500 Hz to 2000Hz
      • Add-on table unit for electronics cabinet, with CPU-holder
      • Zwick extensometer attachment (see catalog)
      • Front/rear safety device
      • Lead-screw guard

      More detail

    • MFlow Extrution Plastomester Zwick

      0 out of 5

      Applicational range

      The Mflow is a modular, expandable device with which you can determine the melt mass and melt volume flow rate. Affordable to setup and gradually expand at any time.

      You can optionally expand the Mflow with, for example, the pneumatic weight lifting unit or the weight pegging unit. The extrusion plastometers are equipped with heating elements that are specially adapted to the thermal conditions of extrusion barrel and device covers. This achieves a very good distribution of temperature over space and time.

      Operation of the Mflow via a PC offers all the advantages of testXpert II: up to six devices per PC can be operated, the traceability of the results and their further processing with testXpert II LIMS is possible for a statistical check and as long-term statistics.

      More Detail

    • Pendulum Impact Tester PSW 750 Zwick

      0 out of 5

      Range of application

      The PSW 750 is used for Charpy impact tests and for tensile impact tests on metals. Impact tests to Charpy can be performed as conventional and instrumented tests.

      An operationally ready instrument includes:

      • Basic instrument without pendulum, with electromagnetic pendulum release and motorized pendulum return, grout and heavy duty screw anchors, electrically monitored safety device and safety housing
      • Test specific accessories such as vises, supports and anvils, pendulums, fins
      • Optional accessories such as PC equipment or specimen temperature units

      More Detail

    • Pendulum Impact Tester RKP 300 Zwick

      0 out of 5

      Range of application

      • Impact and impact bending tests on metals (Charpy, Izod – not instrumented) An operationally ready instrument includes:
      • Basic instrument, with electromagnetic pendulum release and motorized pendulum return, grout and heavy duty screw anchors, electrically monitored safety device and safety housing
      • Steel armament or concrete base
      • Test specific accessories such as vises, supports and anvils, pendulums and fins
      • Optional accessories such as PC equipment or specimen temperature units

      More Detail

    • Pendulum Impact Tester RKP 450 Zwick

      0 out of 5

      Range of Application

      • Impact and impact bending tests on metals (Charpy, Izod – conventional and instrumented)
      • Brugger -Method tests to ensure the wear characteristics of toothed gear wheels
      • Wedge -impact test to determine the strength characteristics of structural adhesives An operationally ready instrument includes:
      • Basic instrument, with electro-magnetic pendulum release and motorized pendulum return, grout and heavy duty screw anchors, electrically monitored safety device and safety housing
      • Steel armament or concrete base
      • Test specific accessories such as vises, supports and anvils, pendulums and fins
      • Optional accessories such as PC equipment or specimen temperature units

      Installation

      According to international Standards, the base frame should be firmly anchored to the floor. This is done either with

      • A steel reinforcement for the The making of the foundation is performed by the customer.
      • Or with a readymade concrete foundation with

      40 times the mass of the largest pendulum, incorporating steel reinforcement. The foundation is equipped with metal lugs for bolting to a solid cement floor.

      Please pay attention to the remarks in PI 476.

      More Detail

    • Proline table-top testing machines Z005-Z100

      0 out of 5

      Range of application

      The ProLine materials testing machine product group was primarily developed for standardized tests on materials and components. Used in conjunction with the intuitive testXpert II software, ProLine materials testing machines are fast and very easy to operate.

      More Detail

    • Rockwell Hardness Tester ZHR Series

      0 out of 5

      Range of application
      The hardness testers of the ZHR product family cover the following methods:
      • Classical Rockwell methods (ZHR4150) according to ISO 6508 and ASTM E 18 Preload: 10 kg. Test load: 60, 100,150 kg Scales: A B C D E F G H K L M P R S V
      • Superfi cial Rockwell (ZHR4045) according to ISO 6508 and ASTM E 18 Preload: 3 kg. Test load: 15, 30, 45 kg Scales: N T W X Y
      • Universal Rockwell (ZHR8150) according to ISO 6508 and ASTM E 18 Preload: 3, 10 kg. Test load: 15, 30, 45, 60, 100, 150 kg Scales: A B C D E F G H K L M N P R S T V W X Y
      • Rockwell Plastics (LKP) according to ISO 2039-2 and ASTM D785 (A & B)

      More Detail

    • Zwick Cutting presses

      0 out of 5

      Range of application

      Zwick cutting presses are used to manufacture specimens from rubber, elastomers, foam rubber, plastic foils, and paper with a hardness up to 85 Shore A (according to ISO 868). The primary specimen shape classifications are as follows:
      • Rectangular specimen
      • Dumbbell specimen
      • Round specimen
      • Special specimen
      Exceeding the given Shore hardness will greatly reduce the lifetime of the cutting blade and, in extreme cases,can result in damage.

      More Detail

    • Zwick/ZHV10 Vickers hardness tester

      0 out of 5

      Range of application:

      • Can be used for all hardness test methods that evaluate via optical measurement of the indentation:
        • Vickers hardness according to DIN EN ISO 6507
        • Knoop hardness according to DIN EN ISO 4545
        • Brinell hardness according to DIN EN ISO 6506
        • case hardening, hardening and nitride hardening depth,
        • as well as the scratch hardness (analogue version)
      • Lowload range from 2 to HV10 are achieved via dead weight application

      More Detail

    • ZwickiLine material testing machines Z0.5 up to Z2.5

      0 out of 5

      Range of application

      zwickiLine is a powerful, flexible and cost-effective testing solution for many different materials and components and is ideal for both research and development and routine quality assurance. A wide range of equipment options allows zwickiLine to be used for tests on plastics, elastomers, metals, composites, paper, board, textiles, foams, foodstuffs and components.

      More Detail