BY TARAFINDAN
HACKLENDINIZ !

NE MUTLU TÜRKÜM DİYENE!

BİR TÜRK DÜNYA'YA BEDELDİR..

TOPRAĞIMIZDA GÖZÜ OLANIN
YURDUNA MEZAR KAZACAĞIZ...

"ZULMÜN OLDUĞU HERYERDEYİZ!"

  • TÜRK SİBER ORDU -
  • FATİH
  • BİZ TÜRKÜZ,BİZ UNUTMAYIZ,BİZ AFFETMEYİZ,BİZ ORDUYUZ
    • -
    <

    Testing and measurment Machines

    • 3103 IHRD Micro Compact Hardness Tester Zwick

      0 out of 5

      Range of application
      The IRHD micro compact hardness tester (Zwick 3103) is designed for hardness tests to IRHD micro on plastics and rubber. The requirements of test standards ISO 48, ASTM D 1415, NFT 46003, and BS 903, part A26 are achieved.
      The hardness tester is used in quality assurance, in goods receiving and outgoing goods checks at manufacturers and processors from the plastics and rubber industry.

      More Detail

    • 5030/6030 Indentec Macro Hardness Tester Zwick

      0 out of 5

      Range of applications
      • Vickers testing to ISO 6507 and ASTM E384, UKAS accredite.

      More Detail

    • AFlow Extrution Plastomester Zwick

      0 out of 5

      Applicational range

      The Aflow is noted for having a high degree of automation: whether simple cleaning and defined pre-compacting at the press of a button, or infinitely settable test loads – the Aflow adapts to your test tasks. The extrusion plastometer supports all globally common standards and procedures, including ISO 1133, ASTM D 1238 according to Methods A, B, C and D.

      The pneumatic precompacting feature allows the polymer to be defined and evenly precompacted at the press of a button – saving time and effort. Furthermore, testXpert II determines the test results in the automatic parameter control, so that the Aflow automatically selects the correct test parameters. This precompacting feature gives you a high degree of user independence even if the testers change often. To further accelerate the test procedure after the test, you have the possibility to eject the remaining material from the extrusion barrel with a force of up to 80 kg and then to clean the extrusion barrel with a pneumatic cleaning device at the press of a button. Space-saving, multi-device operation lets you connect up to six Aflow or Mflow extrusion plastometers to a PC. Of course, you can also use the Aflow in Stand Alone Mode without a PC.

      More Detail

    • Aibot X6

      0 out of 5

      The Aibot X6 is an autonomously flying hexacopter, specifically designed for demanding tasks in surveying, industrial inspection, agriculture and forestry. Equipped with a high level of artificial intelligence, this UAV reaches virtually any target and can independently create high resolution images and videos. An unmatched feature of the Aibot X6 offers the possibility to adapt varying kinds of sensors such as hyper- and multispectral sensors, infrared and thermal sensors and sensors for other industry-specific missions.

      More detail 

       

       

    • Aircraft Tire Dynamometer Testing Machine

      0 out of 5

      Application:

      Legal testing according to the test procedures of the different countries. Customized  starting and landing to the companies test standards.

      Functional principle for Aircraft Tire Dynamometer

      More detail

    • AllroundLine material testing machines Z005 up to Z020

      0 out of 5

      Type

      Item number

      Z020 TN

      1004485

      Z020 TH

      1004487

      Z020 TE

      1004489

      Z020 TNW

      (1  1004486

      Z020 THW

      1004488

      Z020 TEW

      1004490 (1

       
       

      Load frame

                   
      Test load FN in tensile / compression direction  

      20

       

      20

       

      20

       

      20

       

      20

       

      20

       

      kN

      Test area width 440 440 440 640 640 640 mm
      Height of the lower test area, without accessories  

      1030

       

      1430

       

      1785

       

      1000

       

      1400

       

      1755

       

      mm

      Height of the upper test area, without accessories /supplem.

      crosshead required)

       

       

      1015

       

       

      1415

       

       

      1785

       

       

      1015

       

       

      1415

       

       

      1785

       

       

      mm

      Height without leg profiles                    a

      1

      1314 1714 2084 1324 1724 2094 mm
      Height with leg profiles                    a

      2

      1528 … 1868 … 2238 … 1538 … 1878 … 2248 …  

      mm

      2108 2508 3078 2118 2518 3088
      Width without leg profiles 680 680 680 880 880 880 mm
      Width with leg profiles 856 856 856 1056 1056 1056 mm
      (and electronics console) (1044) (1044) (1044) (1244) (1244) (1244) mm
      Depth without leg profiles (3 (4 552 552 552 552 552 552 mm
      Depth with leg profiles (3 690 690 690 690 690 690 mm
      Overall weight with electronics console, without leg profiles  

      165

       

      187

       

      209

       

      212

       

      234

       

      256

       

      kg

      Noise level at maximum speed  

      61

       

      61

       

      61

       

      61

       

      61

       

      61

       

      dB(A)

       

      Drive system

                   
      Crosshead speed up to 110% 0.0005 0.0005 0.0005 0.0005 0.0005 0.0005  

      mm/min

      of test load (v    … v    )

      min           Nom

      … 1000 … 1000 … 1000 … 1000 … 1000 … 1000
      Increased crosshead return speed (at reduced force)  

      1500

       

      1500

       

      1500

       

      1500

       

      1500

       

      1500

       

      mm/min

      Drive system´s travel resolution 0.32495 0.32495 0.32495 0.32495 0.32495 0.32495 nm
       

      Power ratings

                   
      Electrical connections (2 230 230 230 230 230 230 V
      Power rating 2 2 2 2 2 2 kVA

      More Detail

    • Balancing TBR/LTR/PCR Tire testing machine

      0 out of 5

      Application:

      Standard testing and OEM testing according to the test procedures of the automotive companies. Customized Uniformity, Balancing and Run-out testing according to the tire manufacturers internal test standards:

      • Tire static and dynamic balancing

      Functional principle for Uniformity PC, Light Truck, Truck and Bus Tire

      More detail

    • CFlow Extrution Plastomester Zwick

      0 out of 5

      Applicational range

       The Cflow is a compact instrument that allows rapid determination of the Melt mass flow rate of plastics. It is specifically designed for the processors of plastics that are less subject to extrusion tests and which do not require a connection to a PC.

      The temperature control of the heating elements, the heating chamber and the extrusion barrel are perfectly matched to each other. The temperature is generated where it is needed. That ensures an excellent distribution of temperature across the full height of the barrel from the outset.

      Rapid device control is facilitated by the test granulate contained in the scope of delivery. Addition control options are available for the temperature in the extrusion barrel, for the diameter of orifices and barrels with plug gages. An automatic or manual extrudate cutter, a separating door and a die plug are optionally available for the Cflow.

      More Detail

    • CLine material testing machines Z005 up to Z010

      0 out of 5

      Type

      Item number Fmax

      Z005                                     Z010

      1006325                               1006326

      5 kN                                          10 kN

      Power ratings
      Electrical connections 230 VAC (1 PH, N, PE)
      Range of tolerance ± 10 %
      Mains frequency 50/60 Hz
      Power rating 0,7kVA                                  0,8kVA
      EMC characteristics Conforms to the relevant highest requirements of EN 63126-1
      (Class B immunity, Class A emitted interference)

      More Detail

    • Container Spacing Device

      0 out of 5

      The Container Spacing Device (CSD) offers a positive method to space containers that are transported on a table top conveyor. This compact device is compatible with round and non-round containers and is ideal for providing bottle spacing or line flow control.

      More detail

       

       

       

       

       

       

       

       

       

    • Density Comparator

      0 out of 5

      The Density Comparator offers a proven, accurate and reliable method for determining the density of glass and related materials for routine control of composition. This compact table-top device utilizes the Sink-Float approach to determine the density of a sample in accordance with ASTM Standard Method C729.

      With the Density Comparator, up to 6 samples can be tested simultaneously. A circulating water bath with automatic and manual heating controls, as well as a cooling coil for rapid system cooling provides the means for precise temperature control of samples and medium according to test requirements.

      More detail

       

       

       

       

       

       

       

       

       

    • Digital Brinell hardness tester

      0 out of 5

      Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to miss alignments caused by vibrations.

      More detail