BY TARAFINDAN
HACKLENDINIZ !

NE MUTLU TÜRKÜM DİYENE!

BİR TÜRK DÜNYA'YA BEDELDİR..

TOPRAĞIMIZDA GÖZÜ OLANIN
YURDUNA MEZAR KAZACAĞIZ...

"ZULMÜN OLDUĞU HERYERDEYİZ!"

  • TÜRK SİBER ORDU -
  • FATİH
  • BİZ TÜRKÜZ,BİZ UNUTMAYIZ,BİZ AFFETMEYİZ,BİZ ORDUYUZ
    • -
    <

    Ceramics

    • Muffle Furnaces with Flap Door or Lift Door L 1/12 – LT 40/12

      0 out of 5

      The muffle furnaces L 1/12 – LT 40/12 are the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The muffle furnaces come equipped with either a flap door or lift door at no extra charge.

      More Detail

    • Multi Chamber (Variable Gradient) Kilns – TG.3 / TG.6 XL / TG.9 Mk.III

      0 out of 5

      The new range of individual chamber temperature gradient kilns, The TG.3, TG.6 XL and the TG.9 Mk.III (pictured below) are unique in design as they offer the user the ability to set the top temperature to be achieved in each chamber. Hence the user is no longer constrained to a fixed gradient, as was the case with the traditional gradient kilns. Each chamber has its own thermocouple and electrical contactor that is linked back to the TC.S2 / TC.M2 microprocessor controller. This allows the user to program the firing cycle for one of the chambers (this will be the hottest chamber). The temperatures in the remaining chambers will then be set as differences in tem-perature.
      The TC.S2 / TC.M2 controller will allow up to able to store 99 programs with up to 99 segments per programme, and can simultaneously display the temperatures in three adjacent chambers.

    • Non-contact Thermometers (Pyrometers)

      0 out of 5

      The series 8 pyrometers are high-quality, battery driven portables for non-contact temperature measurement between 250 and
      2500°C. The pro series is a revision of the 15 years proven plus series. The instruments feature fully digital signal processing,
      resulting in wider temperature ranges as well as higher accuracy. With the additional integrated graphic display the measuring
      results can be shown and
      analyzed directly on site.
      The aluminium die-cast housing is specially designed for the daily use under rough industrial conditions. The easy focusable precision
      optics provides small spot sizes for measuring distances between 500 mm and ∞. The bright, optimized view finder with
      exact spot indication and built-in temperature display facilitates the accurate aiming on the object.
      Moreover, the large measurement data storage offers the best possibility for subsequent interpretation of the measured values.
      The extremely short response time of 1 ms allows exact measurements of fast moving objects and a very quickly detection of
      temperature differences. The maximum temperature can be stored in the built-in peak picker (maximum value storage).

      ● Very robust aluminum die-cast housing for use in
      rough environments
      ● Focusable precision optics for adjusting smallest
      spot sizes
      ● Temperature display on the housing, in the view
      finder and on the multifunctional display sideways
      ● Large data storage for subsequent analysis of
      measuring data
      ● Integrated maximum value storage to determine
      the peak value achieved during a measuring series
      ● Extremely short response time for measurements
      on fast-moving objects
      ● USB interface for using the optional anaylizing
      software PortaWin
      Temperature ranges IS 8 pro: 600 to 1800ºC (MB18)
      750 to 2500ºC (MB25)
      IGA

    • PRECIOUS METAL FOR GLASS DECORATION

      0 out of 5

      Our Precious metal preparations for glass decoration cover a wide range of products.

       

       

    • PRECIOUS METAL FOR TILES DECORATION

      0 out of 5

      Precious metal preparations for tile decoration in third firing are a very important part of our range of production.

       

       

    • Sanitary plaster Saint Gobain

      0 out of 5

      Saint-Gobain Company  is a world leading producer of industrial plaster and gypsum products, offering high performance solutions for the ceramics, construction, interior design, metal casting, personal care markets and environmental applications

      Through the development of bespoke plaster formulations, Formula provides customers with solutions to optimize performance and value in the casting process.

      More detail

    • Single chamber (Fixed Gradient) kilns – TG.9F

      0 out of 5

      On the left is the TG.9F. The purpose of this gradient kiln is to obtain a series of temperature readings from samples during a single firing cycle. The style of kiln is ideal for trials of ceramic glazes, colours and clay bodies, insulators and sanitaryware etc.
      In this style of kiln a fixed gradient of approximately 20/25°C would be apparent between each of the nine measuring point. Overall there is an approximate gradient of 180°C across the nine thermocouples between the “hot” and “cold” ends.
      As standard the TG.9F kilns incorporate a TCS1 microprocessor controller, able to store 99 programs with up to 99 segments per programme, offering total flexibility in the firing curve.
      A chart recorder can be fitted as an optional extra (as shown)

       

    • Soka Kaolin A L CHINA CLAY

      0 out of 5

    • Soka Kaolin KE CHINA CLAY

      0 out of 5

    • Soka Kaolin METASIAL V800

      0 out of 5

    • Soka Kaolin METASIAL ZS

      0 out of 5

    • Soka Kaolin Z Ref1 China Clay

      0 out of 5