BY TARAFINDAN
HACKLENDINIZ !

NE MUTLU TÜRKÜM DİYENE!

BİR TÜRK DÜNYA'YA BEDELDİR..

TOPRAĞIMIZDA GÖZÜ OLANIN
YURDUNA MEZAR KAZACAĞIZ...

"ZULMÜN OLDUĞU HERYERDEYİZ!"

  • TÜRK SİBER ORDU -
  • FATİH
  • BİZ TÜRKÜZ,BİZ UNUTMAYIZ,BİZ AFFETMEYİZ,BİZ ORDUYUZ
    • -
    <

    KAPPA LA Zwick/Roell

    Application
    • Creep tests
    • Creep rupture tests
    • Stress rupture tests
    • Relaxation tests (only with spring loaded system)
    • Creep crack tests
    • Definition of individual stepless sequences of temperature
    • Ambient or elevated temperature
    • For long term tests (reaching more than 10.000h

    More Detail

    Categories: ,
    • Description
    • Reviews (0)
    • Technical Data
    • accessories

    Product Description

    Specification Kappa 50 LA-DW

    Weight train with dead weights
    • Calibrated dead weights
    • Wear-free elastic hinges for high quality of lever arm bearing
    • Wear free elastic hinges for axial alignment acc. to ASTM E 292 and NADCAP-requirements
    • Manual or motorized loading without shock
    • Accuracy of class 1 acc. to ISO 7500-2 from 4% to 100% of nominal load.

    Specification 50/100 LA-Spring
    Weight train with preloaded spring
    • Preloaded spring
    • Wear-free elastic hinges for high quality of lever arm bearing
    • Wear free elastic hinges for axial alignment acc. to ASTM E 292 and NADCAP-requirements
    • Precision load cell
    • Motorized loading without shock
    • Accuracy of class 1 acc. to ISO 7500-1 from 0,5% to 100% of nominal load.

    Reviews

    There are no reviews yet.


    Be the first to review “KAPPA LA Zwick/Roell”

    Techincal Data 50 LA DW
    Load capacity  50 kN
    Test area-width 520 mm (between columns)
    Test area-height max. 1550 mm vertical clearance (without jig sand fixtures/grips)
    crosshead stroke s  150 mm
    Frame Dimensions (W x D x H) 1050 x 655 x 2300 mm
    Weight 603 kg
    Power requirements 230 VAC, 1 kVA
    Test speed 50 kN  max. 50 mm/min
    Technical data 50/100 KN LA Spring
    Load capacity 50 kN, 100 kN
    Lever arm ratio 20.01
    Test area-width 520 mm (between columns)
    Test area-height max. 1550 mm vertical clearance (without jigsand fixtures/grips)
    Crosshead stroke s 150 mm
    Frame Dimensions (W x D x H) 1050 x 655 x 2300 mm
    Weight 603 kg
    Power requirements 230 VAC, 1 kVA
    Test speed 50 kN max.  50 mm/min
    Test speed 100 kN max.  25 mm/min

    Load cells
    • Electronic „Plug and Play“-Type (Calibration and technical data are saved in sensor plug)
    • High accuracy (Linearity,Repeatability, Hysteresis, resolution) acc. to ASTM E 4 and ISO 7500-1
    • High measurement range in class 1 acc. ISO 7500-1 from 0.4 % ....100% of nominal load

    Pull rods
    • Pull rods made of nickel-based superalloy
    • Durability > 3 years at full load
    • Upper pull rod with spherical bearing, lower pull rod with clamping lever
    • Axial alignment acc. to ASTM E 292 and NADCAP-Requirements
    • No additional alignment cardan joints necessary

    Specimen adapters
    • Specimen adapters made of nickel-based superalloy
    • Screw head
    - Round specimen
    • Clevis couplings
    -Flat specimen
    • Clevis couplings
    - Pipe segment specimen

    HT-controller
    • Integrated, sophisticated Control-Algorithm for a
    precise Temperature along specimen and to prevent
    Temperature overshooting
    • Empirically determined control parameters for different
    temperatures are no longer required
    • Automatic Controller settings from 80°C...1200°C
    • Temperature-tolerances acc. ASTM E 139
    • Interface for 6 Thermocouples (3 for furnace,
    3 for specimen special configurations possible)
    • Digital display of temperatures
    • Stand Alone or PC-operation possible