BY TARAFINDAN
HACKLENDINIZ !

NE MUTLU TÜRKÜM DİYENE!

BİR TÜRK DÜNYA'YA BEDELDİR..

TOPRAĞIMIZDA GÖZÜ OLANIN
YURDUNA MEZAR KAZACAĞIZ...

"ZULMÜN OLDUĞU HERYERDEYİZ!"

  • TÜRK SİBER ORDU -
  • FATİH
  • BİZ TÜRKÜZ,BİZ UNUTMAYIZ,BİZ AFFETMEYİZ,BİZ ORDUYUZ
    • -
    <

    Product

    • 3103 IHRD Micro Compact Hardness Tester Zwick

      0 out of 5

      Range of application
      The IRHD micro compact hardness tester (Zwick 3103) is designed for hardness tests to IRHD micro on plastics and rubber. The requirements of test standards ISO 48, ASTM D 1415, NFT 46003, and BS 903, part A26 are achieved.
      The hardness tester is used in quality assurance, in goods receiving and outgoing goods checks at manufacturers and processors from the plastics and rubber industry.

      More Detail

    • 5030/6030 Indentec Macro Hardness Tester Zwick

      0 out of 5

      Range of applications
      • Vickers testing to ISO 6507 and ASTM E384, UKAS accredite.

      More Detail

    • ADDITIVES FOR PRODUCTION OF SANITARYWARE & TABLEWARE

      0 out of 5

      BMQ provide additives for the production of Sanitaryware and Tableware.

       

    • AFlow Extrution Plastomester Zwick

      0 out of 5

      Applicational range

      The Aflow is noted for having a high degree of automation: whether simple cleaning and defined pre-compacting at the press of a button, or infinitely settable test loads – the Aflow adapts to your test tasks. The extrusion plastometer supports all globally common standards and procedures, including ISO 1133, ASTM D 1238 according to Methods A, B, C and D.

      The pneumatic precompacting feature allows the polymer to be defined and evenly precompacted at the press of a button – saving time and effort. Furthermore, testXpert II determines the test results in the automatic parameter control, so that the Aflow automatically selects the correct test parameters. This precompacting feature gives you a high degree of user independence even if the testers change often. To further accelerate the test procedure after the test, you have the possibility to eject the remaining material from the extrusion barrel with a force of up to 80 kg and then to clean the extrusion barrel with a pneumatic cleaning device at the press of a button. Space-saving, multi-device operation lets you connect up to six Aflow or Mflow extrusion plastometers to a PC. Of course, you can also use the Aflow in Stand Alone Mode without a PC.

      More Detail

    • Aibot X6

      0 out of 5

      The Aibot X6 is an autonomously flying hexacopter, specifically designed for demanding tasks in surveying, industrial inspection, agriculture and forestry. Equipped with a high level of artificial intelligence, this UAV reaches virtually any target and can independently create high resolution images and videos. An unmatched feature of the Aibot X6 offers the possibility to adapt varying kinds of sensors such as hyper- and multispectral sensors, infrared and thermal sensors and sensors for other industry-specific missions.

      More detail 

       

       

    • Aircraft Tire Dynamometer Testing Machine

      0 out of 5

      Application:

      Legal testing according to the test procedures of the different countries. Customized  starting and landing to the companies test standards.

      Functional principle for Aircraft Tire Dynamometer

      More detail

    • Alghamix II 230V

      0 out of 5

      Zhermack Spa, founded in 1981, offers cutting edge materials and solutions for impressions in the surgery and laboratory, in this way positioning itself among the most important companies in the dental sector.

      2

      Download: Alghamix II Catalogue Download

    • Algitray

      0 out of 5

      Zhermack Spa, founded in 1981, offers cutting edge materials and solutions for impressions in the surgery and laboratory, in this way positioning itself among the most important companies in the dental sector.

      2

      Download:Algitray Catalogue Download

    • AllroundLine material testing machines Z005 up to Z020

      0 out of 5

      Type

      Item number

      Z020 TN

      1004485

      Z020 TH

      1004487

      Z020 TE

      1004489

      Z020 TNW

      (1  1004486

      Z020 THW

      1004488

      Z020 TEW

      1004490 (1

       
       

      Load frame

                   
      Test load FN in tensile / compression direction  

      20

       

      20

       

      20

       

      20

       

      20

       

      20

       

      kN

      Test area width 440 440 440 640 640 640 mm
      Height of the lower test area, without accessories  

      1030

       

      1430

       

      1785

       

      1000

       

      1400

       

      1755

       

      mm

      Height of the upper test area, without accessories /supplem.

      crosshead required)

       

       

      1015

       

       

      1415

       

       

      1785

       

       

      1015

       

       

      1415

       

       

      1785

       

       

      mm

      Height without leg profiles                    a

      1

      1314 1714 2084 1324 1724 2094 mm
      Height with leg profiles                    a

      2

      1528 … 1868 … 2238 … 1538 … 1878 … 2248 …  

      mm

      2108 2508 3078 2118 2518 3088
      Width without leg profiles 680 680 680 880 880 880 mm
      Width with leg profiles 856 856 856 1056 1056 1056 mm
      (and electronics console) (1044) (1044) (1044) (1244) (1244) (1244) mm
      Depth without leg profiles (3 (4 552 552 552 552 552 552 mm
      Depth with leg profiles (3 690 690 690 690 690 690 mm
      Overall weight with electronics console, without leg profiles  

      165

       

      187

       

      209

       

      212

       

      234

       

      256

       

      kg

      Noise level at maximum speed  

      61

       

      61

       

      61

       

      61

       

      61

       

      61

       

      dB(A)

       

      Drive system

                   
      Crosshead speed up to 110% 0.0005 0.0005 0.0005 0.0005 0.0005 0.0005  

      mm/min

      of test load (v    … v    )

      min           Nom

      … 1000 … 1000 … 1000 … 1000 … 1000 … 1000
      Increased crosshead return speed (at reduced force)  

      1500

       

      1500

       

      1500

       

      1500

       

      1500

       

      1500

       

      mm/min

      Drive system´s travel resolution 0.32495 0.32495 0.32495 0.32495 0.32495 0.32495 nm
       

      Power ratings

                   
      Electrical connections (2 230 230 230 230 230 230 V
      Power rating 2 2 2 2 2 2 kVA

      More Detail

    • Annealing, Hardening and Brazing Furnaces N 7/H – N 87/H

      0 out of 5

      To withstand harsh use in the laboratory, e.g. when heat-treating metals, robust insulation with light refractory bricks is necessary. The N 7/H – N 87/H models are a perfect fit to solve this problem. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quench tank. Even high-performance applications like the annealing of titanium in medical applications can be implemented without the use of expensive and complicated annealing systems.

      More Detail

    • Arctic Blast

      0 out of 5

      Flexible sizes from 10m2

      The temperature reduction zone of a ArcticBlast 5 is more than 20 m2 – with pallet footprints of 1.2 m2 (UK) and 0.96 m2 (EU) the realistic pallet capacity for fastest results, including free space for air circulation, is 10 pallets. Smaller ArcticBlast sizes/ lower effect models are available. For 3 pallets a standard ArcticStore 10’ will work quite well with rapid chilling and even blast freezing small volumes.

      Rapid chilling fruit and vegetables

      calculated on average values 20.000 KG of fruit or vegetables will reduce by 1°C each 20 minutes or be cooled to +5°C core temperature from 30°C in approx. 8 hours.

      Blast freezing meats

      Different meats also have different thermal loss values; the greater the fat % then the faster the heat loss. Again using averages 20.000 KG at (+5°C) of high % fat beef will be frozen to -18°C core temperature in approx. 22 hours whereas lean beef requires almost 30 hours. Typically meats take between 1 hour and 1½ hours per 1.000 KG from +5°C to core temperature of -18°C

      View Catalog

    • Arctic Store

      0 out of 5

      Designed and built with the user, reliability, performance and running costs in focus ArcticStore bring a new dimension to the temperature controlled, portable cold storage market.
      For customers who do not need 3 or more pallet wide cold stores, ArcticStore deliver an extremely cost efficient alternative to all other products available in the market! If you require 3 or more pallet wide please ask about our Super- Store models.

      View Catalog